AUTONET TV

Suspension Service in Newark at Union Street Automotive

When they hear the word suspension, many drivers in Newark may think back to those energetic days of grade school. Well, your vehicle's suspension is actually a good thing because it keeps your vehicle up off the road and helps provide a comfy ride around Newark. Its job is to keep your wheels firmly planted over bumps and through curves. Your suspension system has many parts. If you look under your vehicle, it's basically everything that connects your wheels to the vehicle's frame. These are heavy duty parts that do a lot of work. They need to be inspected for damage and excessive wear at least once a year. A good time for this is when you get your annual alignment service at Union Street Automotive.

Here are some warning signs of suspension problems:

• the car pulls to one side
• it wanders
• the steering is erratic
• you see uneven tire wear
• you experience a poor ride or handling
• you see oil leaking from shocks

Basically, you just don't feel in control when you're driving.

Some suspension parts just wear out with use. Shocks and struts eventually lose their ability to control your ride. Wheel bearings need to be repacked every couple of years. And some suspension pieces need to be lubricated when you get your oil changed. Your service advisor at Union Street Automotive can perform an inspection and tell you what problems you may have.

If you're in an accident, your suspension can be damaged or knocked out of alignment. Even a minor accident, like hitting a curb around Newark or even a large rock can mess things up for drivers. With a minor accident it's tempting for many to just get an alignment or wheel balance to correct the problem. But if there's damage, a simple alignment won't actually fix the problem, and you'll just have to align it again after the repairs are made. So if you have an accident, get your suspension system inspected right away. Suspension problems are a major safety issue because they can lead to unsafe handling.

One big cause of suspension damage for Newark drivers is potholes – those nasty magnets that form in roads in freezing weather. They seem to draw our tires right into them. Here are some tips for avoiding damage from potholes: First, keep your tires at their full air pressure. That gives tires their maximum resiliency and will hopefully keep your wheels or other suspension parts from crunching on a big hole. Next, just pay attention. When you see a hole you can't miss, slow down before you hit it. Driving at a slower speed will limit the damage and may keep your drink from spilling. But avoid the temptation to brake directly over the pothole. That will cause the car's weight to shift forward and add to the potential damage.

Union Street Automotive
175 W Union Street
Newark, NY 14513
315-331-2525
www.unionstreetautomotive.net

A Clean Sweep (Fuel Injector Cleaning)

Your vehicle gets its power from burning fuel, usually gasoline, and it counts on something called fuel injectors to send gas to the engine in a spray that is easy to ignite.  It’s a precise operation, and when it’s working well, you have plenty of power and an efficient engine.

But after time, contaminants in the fuel system may prevent the injectors from spraying like they’re supposed to.  They can also shoot contaminants into the engine. 

One sign that could point to dirty fuel injectors is a misfiring engine. Misfires can be caused by several things, so it’s a good idea to bring your vehicle to us so we can trace the cause. Another sign is that your fuel economy has gone downhill or your engine doesn’t have the “pep” it used to.

If we discover that your injectors are clogged or not working the way they should, we can clean them to get rid of those contaminants to restore your engine to its top performance.  When you bring your vehicle to us, we will connect the flushing equipment, flush out the injectors and reassemble the system.

A good time to have fuel injectors inspected is when you bring your vehicle in for routine maintenance.  An oil change is an ideal time to have a technician take a close look at your entire fuel delivery system. 

When you have your fuel injectors cleaned, you may see your mileage go up, your engine performance improve, and your exhaust emissions decrease.

Union Street Automotive
175 W Union Street
Newark, NY 14513
315-331-2525
www.unionstreetautomotive.net

The Third Brake Light (Third Brake Light Service)

So you thought you only had two brake lights.  Look again and you'll see one in the center at a higher level than the two on either side of the vehicle.  They're sometimes in the inside of the vehicle behind the back window, or they could be in the deck lid, on the roof or on the spare wheel carrier,

But why is that third brake on your vehicle? Experts say it helps prevent rear end collisions. Tests done by installing the third brake light in taxis and fleet vehicles showed fewer rear end crashes in the ones that had the extra light. The third brake light was mandated in new passenger cars in 1986 in the US and Canada.  The requirement was added to new light trucks and vans in 1994.

Sometimes it's difficult to know if your third brake light is even working.  Many vehicles have bulb warning systems that alert you to non-functional bulbs, but not all do. Your vehicle service facility will often check to see if all your turn signals, taillights and headlights are working during routine maintenance inspections, and they may notice that the third brake light is out. 

So, do you have to have it replaced? Not necessarily. Many areas only require one brake light to work in the rear of a vehicle. So even though new vehicles have to have the third brake light, you may not get a ticket if it eventually stops working.  But you may be missing an opportunity to drive a safer vehicle if you don't get it fixed.

In 1995, an insurance institute study found that 1986 model cars were involved in 5 percent fewer rear-end collisions from 1986-1991 than they would have expected without the extra light.

Ask your service advisor for advice.  Keep in mind that in these days of drivers distracted by everything from texting to putting on makeup while driving, you can reasonably conclude that anything that makes you more visible to the vehicle behind you adds one more—possibly life saving—safety margin. 

Union Street Automotive
175 W Union Street
Newark, NY 14513
315-331-2525
www.unionstreetautomotive.net

Prepare Your Windshield for Winter (Wiper Blades and Fluid for Freezing Temperatures)

Winter and freezing temperatures present challenges for different parts of your vehicles.  For example, winter tires give you better traction on snow.  But some parts of your vehicle that may need special attention for winter are your windshield wipers. You may have found yourself in the middle of a snowstorm when your windshield wipers are doing nothing but streaking slush that ices up on contact on the glass.  Now you're more blind than you were before!

Obviously being able to see during a snowy or icy winter event is important for the safe operation of any vehicle.  So keeping your windshield and rear window clean can go a long way to guarantee you can see your surroundings.

Let's start with the wipers.  Blades that are good for hot weather may not be robust enough for freezing weather. You can buy special winter wiper blades that stay flexible during sub-zero temperatures.  The stiffer frames that hold them have a rubber covering that prevents ice and snow from building up.  Another style is beam wipers that have a one-piece design, intended for use all year long.  Since these have no separate frame, ice can't build up like on traditional frame wipers.  

If you've ever had salty road brine kicked up on your windshield, you know it can blind you in a second.  So you absolutely must have windshield washer fluid available to clear your vision.  The fluid you use during the warm weather months will often freeze below 32°F/0°C, and that can actually make things worse by icing up your windshield when you spray it.  Worst of all, it may freeze in your washer reservoir.

Be sure to use washer fluid that is meant for sub-freezing temperatures; special formulas will remain a liquid in weather as cold as -30°F/-34.4°C.  Some contain alcohol to keep them flowing; some have a little antifreeze that will melt snow and ice.  If you do use these liquids, make sure to keep them away from small children and pets because they're poisonous if they drink them. 

Each climate is different, and there are windshield products to meet your needs.  Your service advisor can recommend which ones will work best for you.  The idea is in winter, you need to be able to see. 

Union Street Automotive
175 W Union Street
Newark, NY 14513
315-331-2525
www.unionstreetautomotive.net

Keeping Your Engine Cool in Newark, NY

The cooling system keeps NY vehicle's engines from overheating while they are driving around Newark. Its job is to move heat away from the engine. Let's talk about the various components of the system and how they make this happen.

The radiator is the part most Newark drivers associate with the cooling system. Coolant flows through the radiator which has fine cooling fins that draw the heat out of the coolant and dissipate it into the air. To make sure there's enough airflow over the radiator, a fan pulls air over the cooling fins even when the vehicle is idling.

In some vehicles, the fan is powered by the serpentine belt. On others, an electric motor runs the fan. Electric fans turn on and off as needed. You may have heard the fan kick on shortly after you turn your vehicle off. The sensor has determined that the engine needs a little help cooling down to a safe temperature.

A hose connects the radiator to the water pump. The water pump pushes the water into the vehicle engine block. Now the engine block and cylinder heads have passages for the coolant to pass through without getting into the oil or the combustion chamber. In the automotive community, these passages are referred to as the "water jacket."

While the coolant is passing through the water jacket, it absorbs heat from the vehicle engine on its way to the radiator for cooling. Between the engine and the radiator is a gatekeeper called the thermostat. The thermostat's job is to regulate the temperature of the engine just like your home thermostat regulates the temperature in your house. It gets your engine up to the correct operating temperature and then keeps it from overheating.

When you first start the engine, it's very cold and needs to warm up. So the thermostat blocks the flow of coolant to the radiator. As the engine warms up, the thermostat starts to let coolant flow through the system.

The final component the team at Union Street Automotive wants to point out is the overflow reservoir. This bottle is designed to hold some of the coolant. It'll have a mark that indicates whether or not you have enough coolant. This is where you should add coolant if you just need to top it off.

Caution: never open the reservoir or the radiator cap when the car's hot. The cooling system is pressurized, and opening those caps while it's hot can cause hot coolant and steam to escape resulting in serious burns.

Cooling system failure is the most common mechanical failure in vehicles around Newark, NY. At Union Street Automotive, we can do a periodic inspection of the components for  leaks, loose connections and weakening hoses.

Your vehicle manufacturer has also specified a cooling system service interval. With a cooling system service at Union Street Automotive in Newark, the old coolant is replaced with correct clean fluid that contains the additives required to prevent corrosion. The additives are depleted over time and you need fresh fluid for adequate protection. Your radiator pressure cap should be replaced at this service as well.

Union Street Automotive
175 W Union Street
Newark, NY 14513
315-331-2525
www.unionstreetautomotive.net