AUTONET TV

Steering Clear in Newark

Those who know vehicles believe the steering system may be the most vital component of them all. Perhaps you've found over the years your steering has gotten loose. Or maybe suddenly, your steering wheel has gotten very hard to turn. Let's steer you in the direction of understanding why this may be happening.

First, loose steering. This can likely be the result of wear and tear on the components that connect the steering mechanism with the wheels. Those parts can be ball joints, Pitman arms or tie rods. These parts take a lot of abuse on the road, thanks to railroad tracks, potholes, uneven surfaces: you name it. It's important that they be checked regularly and maintained at Union Street Automotive.

Second, the hard-to-turn wheel. Virtually all vehicles on the road have power steering. There are a couple of different types, though, so let's deal with each. By the way, when they fail, your vehicle's steering can suddenly go from easy peasy to really hard to control.

Some vehicles have hydraulic power steering. It uses a hydraulic fluid that can either leak out or become contaminated. When that happens, you can lose that power assist. There's also a belt involved, and if it becomes worn, stretched or cracked (or even breaks), you'll find yourself struggling with the wheel. If you hear a loud whine coming from the area in the engine compartment when you are steering, that could mean your power steering pump is failing. The best way to avoid these problems is regular maintenance.

Recently, manufacturers have been using electric power steering systems that have some advantages over hydraulic systems. They have electric motors that—like everything mechanical—can fail. Sometimes a fuse to the power steering motor will blow, but simply replacing the fuse often doesn't get to the root cause of the problem. A Union Street Automotive technician can evaluate the system and recommend a solution.

Steering issues are all about safety and should be addressed as soon as possible. When you tell your service advisor, try to be specific about the signs and symptoms. It's one way to steer clear of trouble on the road.

Union Street Automotive
175 W Union Street
Newark, NY 14513
315-331-2525
www.unionstreetautomotive.net

A Non-Starter (Alternator Problems in Cold Weather)

As the temperatures dip, we all know there could be problems starting our vehicles. After all, batteries can grow old and not hold a charge as well as when they were newer. Or starters can go bad.  But there's one more component to keep an especially sharp eye on during winter: your alternator.

The alternator is sort of like a small generator. It sends power out to various parts in your vehicle that need electricity.  That includes the battery, which needs charging to keep its power topped off.  The alternator creates electricity by taking mechanical energy from the engine and turning it into electricity.  It is connected to the engine by belts and pulleys. 

In cold weather, the material the belt is made from is less flexible than it is in warm weather.  That means it may not be turning the pulleys as effectively since it doesn't have the same grip. Also, when it's colder, lubricants, including the engine oil, are a little stiffer and parts just don't move like they do when the weather's warmer.  With that extra strain, sometimes it takes the alternator longer to recharge the battery. That, in turn, may leave the battery a little less power to start the engine when it's cold.

You may have a warning light on your instrument panel that looks like a battery.  If it lights up or if you notice your headlights flickering or not shining quite as brightly as they usually do, it could mean a weak alternator. But it also could be an aging battery, corroded battery terminals, a loose belt or another charging system part. Yes, it's complicated. 

Pinpointing the cause involves testing the battery and charging system with diagnostic equipment.  If it does turn out to be an alternator, there are options besides replacing it with a brand new, original equipment part.  Ask your service advisor for recommendations. Obviously, you want your vehicle to start reliably, especially in cold weather.  Take care of your charging system and it will take care of you.

Union Street Automotive
175 W Union Street
Newark, NY 14513
315-331-2525
www.unionstreetautomotive.net

Bump in the Road (Alignment)

There's something you can do that helps your tires last longer, wear more evenly and your vehicle handle better.  "Sign me up," you say! Wondering what that is? It's aligning your wheels, and it will literally point you in the right direction when it comes to a better and safer driving experience.

When your vehicle was designed, the engineers made sure your tires were all pointing the same way by designing the suspension to make optimal contact with the road. That way the ride is smooth, you don't feel vibrations or shimmying and your vehicle travels in a straight line, without pulling to one side or the other.

Unfortunately, your vehicle is not brand new; time and distance take their toll.  After hitting countless bumps, potholes, or the occasional curb, your suspension gets knocked a little out of kilter.  Those precise angles the engineers planned on for your vehicle? They get out of whack

Uneven or premature tire wear is one of the first signs your alignment may be off.  If you are driving straight and your steering wheel isn't pointing straight, that's another indication alignment might need checking. Tire squealing can also be a clue.

When you bring your vehicle in for an alignment, we use equipment designed to measure the tilts and angles of your suspension's parts.  The technician will also check to see if any of the vehicle's suspension components are worn or broken.  We will also check your steering angle sensor to make sure it's set properly. 

The process is different for vehicles that are front-wheel drive, rear-wheel drive, all-wheel drive, or 4-wheel drive. 

After your alignment, your tires should wear more evenly, your steering should be straight and your wheels vibration-free.  If it's been a while since you've had your vehicle aligned, bring it in and we'll check it.  Usually, your alignment will be a little off after one or two years of driving, and it's wise to follow your vehicle manufacturer's recommendation for how often your model should be checked.

Union Street Automotive
175 W Union Street
Newark, NY 14513
315-331-2525
www.unionstreetautomotive.net

Not So Hot in Newark

When the weather turns cold, it's nice to crank up the furnace and enjoy the heat. But if your home's furnace doesn't work, it's not too comfortable. Same goes with your vehicle. When the heater's not working, things can get miserable. It could also signal some major problems, which we'll discuss later.

A vehicle's heating system is fairly complicated. It's made up of several parts, including a blower motor/fan, a heater core and some mechanical and electrical components. In basic terms, a vehicle's engine warms up coolant which is then sent to the heater core (which is kind of like a small radiator) behind the dash. That blower motor sends cold air through the heater core which heats up the air. Voila! Heat.

Diagnosing problems in this system takes a trained mechanic because of the different possible issues. Your heater core may need replacing; they are sometimes in tight spots and may be difficult to work on. Another possible problem could be a defective thermostat, which regulates how the coolant flows through the engine. You may have a leak somewhere in your cooling system. Those leaks may be something as simple as a detached hose clamp or as serious as a bad head gasket. A knowledgeable technician at Union Street Automotive will be able to track the problems down.

For those reasons, it's wise to get your vehicle's heating system repaired. Not only can driving an unheated vehicle on a cold day freeze your fingers, some related engine problems that are not repaired could leave you stranded.

Smart drivers keep up the maintenance on their vehicle's cooling system; it's a hot tip to prevent a cold vehicle.

Union Street Automotive
175 W Union Street
Newark, NY 14513
315-331-2525
www.unionstreetautomotive.net

Upsizing Wheels and Tires With Union Street Automotive

Many Newark drivers want to accessorize their vehicle - you know, make it theirs. One of the easiest ways to get a custom look is to get some new wheels. There are thousands of wheel designs at Newark area tire shops to get you the look you want. And for many Newark drivers, that look includes bigger wheels. It used to be that cars came from the factory with 15 or 16 inch wheels. Now 16, 17 and even 18 inchers are standard. And the factories are offering optional wheel packages up to 20 inches or more.

So let's talk about what to consider when you want to upsize your wheels. It's not exactly a DIY project, so you need to know a thing or two before you get started. The most important term to know is rolling diameter. The rolling diameter is simply the overall height of your tire. Unless you want to modify your vehicle suspension, you'll want to keep your rolling diameter the same when you upsize your wheels.

Let's think about those three golden doughnuts in front of you. They're all about the same size. So if we pretend they're tires, they would have the same rolling diameter. The doughnut hole is the size of the wheel. Now pretend we've made the hole bigger on some. That's like having a bigger wheel - but the rolling diameter is the same.

It's important to keep the rolling diameter the same for several reasons. First of all, if the tire is bigger, it might not fit in the vehicle wheel well. Next the speedometer, odometer and anti-lock brake system are all calibrated for the factory rolling diameter. In order for your anti-lock brakes to work properly, the rolling diameter must stay within 3% of the factory recommendation. If you ignore that, you run the risk that your anti-lock brakes won't work properly.

Some have vehicles with electronically-controlled suspension that will be negatively affected by changing the rolling diameter. Let's think about the doughnuts again. You see, as the size of the wheel gets bigger, the sidewall gets shorter. The tire holds less air, so the sidewalls are made stiffer to compensate.

Low profile tires from top manufacturers use special compounds that give the sidewall the strength it needs without compromising ride quality. As you increase your wheel size, you'll typically get a slightly wider tire. This means that you have a larger contact patch. The contact patch is part of the tire that contacts the road. Because there's more rubber on the road, the vehicle will handle better. And braking distances will be shorter. A lot of Newark folks with trucks or SUVs love the extra control.

NY drivers need to watch out that the contact patch isn't so big that the tires rub in turns or over bumps. What we're talking about here is fitment. Your tire professional at Union Street Automotive can help you get this right. He'll install your new wheels, add spacers if needed to make sure your brakes fit inside your new wheels and get you rolling.

Also, if you drive off-road in NY a lot, you may need a higher profile tire to protect your new rims. And make sure your new tires have the load rating you need if you tow a trailer or haul heavy loads. Again, your tire professional at Union Street Automotive knows how to help.

And don't forget about tire pressure. If you have larger rims, your new tires will hold less air and they'll need to run a slightly higher pressure. Forget that and you'll wear your tires out fast. Finally, get an alignment at Union Street Automotive after you get your new shoes. 

Stop by Union Street Automotive to learn more about how you might upsize your wheels or tires.

You'll find us at:

Union Street Automotive
175 W Union Street
Newark, NY 14513
315-331-2525
www.unionstreetautomotive.net